会员体验
专利管家(专利管理)
工作空间(专利管理)
风险监控(情报监控)
数据分析(专利分析)
侵权分析(诉讼无效)
联系我们
交流群
官方交流:
QQ群: 891211   
微信请扫码    >>>
现在联系顾问~
热词
    • 1. 发明专利
    • Monitor device of dc power supply
    • 直流电源监控装置
    • JPS5769324A
    • 1982-04-28
    • JP14113280
    • 1980-10-11
    • Daiwa Dengiyou KkShowa Shinku:Kk
    • MATSUMOTO TORAJIROUISHIKAWA YOSHIO
    • C23C14/54C23C14/38G05F1/02H01J37/32
    • H01J37/32018
    • PURPOSE:To eliminate monitor performed by a maintainer and at the same time to give the close monitor to the stability of electric descharge, by counting the shifting frequency from the glow discharge to the arc discharge to obtain a detection output. CONSTITUTION:The pulse number setting mechanism of a pulse counter 7 is set to the proper number of pulses that decides no recovery to the normal glow discharge. When the glow discharge of load becomes unstable, the output DC voltage corresponding to the arc discharge stage is devided by a potentiometer 3 to be applied to an input terminal of a comparator 4. This divided voltage is then compared with the voltage of a setting power supply 5. As the voltage of the supply 5 is set at the divided voltage at that moment, the signal is delivered from the comparator 4 at this moment. Then the pulse is generated from a pulse generating circuit 6. The counter 7 counts these pulses and delivers a ddtection signal when the count value reaches the set pulse numerical value. This detection signal actuates an alarm curcuit 8 and a breaker 9. Thus a power supply circuit is cut off, and at the same time an alarm is produced.
    • 目的:为了消除由维护者进行的监视,同时通过计算从辉光放电到电弧放电的移动频率,使密闭监视器达到电气放电的稳定性,从而获得检测输出。 构成:将脉冲计数器7的脉冲数设定机构设定为决定不恢复正常辉光放电的适当数量的脉冲。 当负载的辉光放电变得不稳定时,与电弧放电级相对应的输出直流电压由电位计3分配,以施加到比较器4的输入端。然后将该分压与设定功率的电压进行比较 供应5.当电源5的电压被设定在此刻的分压时,此时信号从比较器4输出。 然后从脉冲发生电路6产生脉冲。当计数值达到设定的脉冲数值时,计数器7对这些脉冲进行计数并输出ddt信号。 该检测信号使报警电路8和断路器9动作。因此,切断电源电路,同时产生报警。