Method for the manufacturing of products with anodized high gloss surfaces from extruded profiles of Al—Mg—Si or AS-Mg—Si—Cu, where the alloys initially are cast to extrusion billets), containing in wt. % Si: 0.25-1.00 Mg. 0.25-1.00 Fe: 0.00-0.15 Cu: 0.00-0.30 Mn: 0.00-0.20 Cr: 0.00-0.10 Zr: 0.00-0.10 Se: 0.00 -0.10 Zn: 0.00-0.10 Ti: 0.00-0.05., and including incidental impurities and balance A.L a) where the billet is homogenised at a holding temperature between 480° C. and 620° C. and soaked at this temperature for 0-12 hours, where after the billet is subjected to cooling from the homogenisation temperature at a rate of 150° C./h or faster, b) the billet is preheated to a temperature between 400 and 540° C. and extruded preferably to a solid shape profile and cooled rapidly down to room temperature, c) optionally artificially ageing the profile, d) deforming the profile more than 10% by a cold roiling operation, whereafter e) the profile is flash annealed with a healing time of maximum two minutes to a temperature of between 450-530° C. for not more than 5 minutes and subsequently quenched, and f) optionally the profile after flash annealing is further subjected to a cold deforming operation to remove residual stresses from cooling and adjusting dimensional tolerances, and g) the profile is finally aged.